Beatbot Sora 70 vs Sora 30 Robotic Pool Cleaners: Which One Should You Choose?

When comparing the Beatbot Sora 70 and Beatbot Sora 30, the biggest difference is easy to understand: Beatbot Sora 70 adds active water surface cleaning, while Beatbot Sora 30 focuses on the main cleaning zones below the surface.

Both robotic pool cleaners are designed for in-ground and above-ground pools. Both clean the floor, walls, waterline, and accessible shallow areas such as steps and platforms as shallow as 20 cm. Both also offer cordless operation, app control, smart surface parking, automatic water release, dual filtration, and strong suction power of approximately 25,700 L/h, or about 25.7 m³/h.

So the choice is not really about whether Sora 30 can clean shallow platforms. It can. The real question is this:

Do you need your pool robot to clean floating debris from the water surface, or is your regular cleaning mainly focused on the floor, walls, waterline, and shallow areas?

If leaves, pollen, insects, or light debris often stay on top of the water, Beatbot Sora 70 is the better fit. If most of the dirt in your pool sinks, collects at the waterline, or gathers on shallow ledges, Beatbot Sora 30 may already cover the areas that matter most.

Quick Comparison: Beatbot Sora 70 vs Sora 30

The Main Difference: Active Water Surface Cleaning

The key upgrade on Beatbot Sora 70 is JetPulse™ Water Surface Cleaning.

This feature is designed to handle floating debris before it sinks or spreads across the pool. Twin jets create converging water flows that guide leaves, pollen, insects, and other light debris toward the suction centre. For pool owners who regularly skim the surface by hand, this is the feature that makes the biggest practical difference.

Beatbot Sora 70 also supports app-controlled water surface navigation, allowing you to guide the robot toward areas where floating debris tends to collect. This is especially useful for pools near trees, gardens, hedges, or open outdoor areas where wind can push debris to one side of the pool.

Beatbot Sora 30 does not actively clean the water surface. Instead, it focuses on the main cleaning zones below the surface: the floor, walls, waterline, and accessible shallow platforms.

This does not make Sora 30 a basic model. It simply means it is built for a different cleaning routine. If floating debris is not a major issue in your pool, Sora 30 may already provide the coverage you need.

One point is important: water surface cleaning is not the same as water surface parking. Beatbot Sora 70 cleans floating debris on the surface. Beatbot Sora 30 can rise to the surface after cleaning for easier pickup, but that is a retrieval feature, not a surface-cleaning function.

What Beatbot Sora 70 Does Better

Beatbot Sora 70 is the better choice if you want a robotic pool cleaner that can handle both floating debris and the main cleaning zones below the waterline.

Its biggest advantage is that it expands the cleaning area from floor, walls, waterline, and platforms to include the water surface. This makes it more suitable for pools where debris appears in several places at once.

For example, Sora 70 is a stronger fit if your pool often has:

• Leaves floating on the water
• Pollen on the surface
• Insects or light garden debris
• Debris blown in by wind
• Surface dirt that needs regular manual skimming

In these situations, active water surface cleaning is not just an extra function. It removes a recurring manual task from your pool care routine.

Sora 70 also has a larger 6 L debris basket, which helps when the pool collects more debris. A larger basket can reduce how often you need to empty the filter during heavier cleaning conditions.

Its runtime is also flexible depending on the mode. It can run for up to 7 hours for water surface cleaning, up to 5 hours for floor cleaning in ECO mode, and up to 4 hours when cleaning the floor, walls, and waterline together.

What Beatbot Sora 30 Does Well

Beatbot Sora 30 is the better choice if your cleaning needs are mainly below the surface.

It still covers the areas that many pool owners care about most: the floor, walls, waterline, and accessible shallow platforms. It can clean steps and platforms as shallow as 20 cm, which is especially useful for pools with tanning ledges, large steps, shallow shelves, or swim-out areas.

Sora 30 also uses the same strong suction level of approximately 25,700 L/h, the same 10,000 mAh battery capacity, dual filtration, smart surface parking, automatic water release, and app control.

That means you are not giving up the core cleaning experience. You are mainly deciding whether you need active water surface cleaning.

For many European residential pools, especially pools where debris tends to sink or collect along the walls and waterline, Sora 30 can be the more practical choice. It is also lighter at 8.9 kg, compared with 10.4 kg for Sora 70, which may make handling and storage easier for some users.

What Both Beatbot Sora Models Have in Common

Both Beatbot Sora 70 and Beatbot Sora 30 are cordless robotic pool cleaners designed to reduce manual pool maintenance.

They both clean:

• Pool floor
• Pool walls
• Waterline
• Accessible shallow platforms and steps down to 20 cm

They also share several important technologies.

Both models offer approximately 25,700 L/h / 25.7 m³/h suction power, which helps remove sand, dirt, leaves, and debris from different pool surfaces. Both use dual roller brushes with a 260 mm cleaning path, helping the robot cover more area with each pass.

Both models also include dual filtration: a standard 150 µm filter and an optional 3 µm ultra-fine filter. The standard filter is suitable for larger debris, while the ultra-fine option is designed for smaller particles.

For convenience, both models include smart surface parking and SmartDrain™ automatic water release, making pickup easier after the cleaning cycle. Instead of having to pull a heavy water-filled robot out of the pool, the automatic water release helps reduce the weight during retrieval.

Both models are also app-compatible, allowing users to control and manage cleaning more easily.

Cleaning Modes Compared

Beatbot Sora 70 has more cleaning modes because it includes dedicated water surface cleaning and a more complete all-zone cleaning option.

Beatbot Sora 70 includes 6 cleaning modes:

• Pro Mode: floor, walls, waterline, and water surface
• Standard Mode: floor, walls, and waterline
• Floor Mode
• Water Surface Mode
• ECO Mode
• Platform Mode

Beatbot Sora 30 includes 4 cleaning modes:

• Standard Mode: floor, walls, and waterline
• Floor Mode
• ECO Mode
• Platform Mode

The difference is clear. Sora 70 gives you more control when surface cleaning is part of the job. Sora 30 keeps the cleaning setup simpler while still covering the main pool zones.

Debris Basket and Filtration

Beatbot Sora 70 has a 6 L debris basket, while Beatbot Sora 30 has a 5 L debris basket.

The larger basket on Sora 70 is useful for pools that collect heavier debris, especially leaves and floating materials. If your pool is near trees or open garden areas, the extra capacity may help the robot clean for longer before the basket needs to be emptied.

Sora 30 still has a large 5 L basket, which is enough for many regular pool cleaning routines. If your pool does not collect a large amount of floating debris, the basket difference may not be a major deciding factor.

Both models use a 150 µm standard filter and support an optional 3 µm ultra-fine filter. This makes both models suitable for handling a mix of larger debris and finer particles.

Runtime and Battery

Both Beatbot Sora 70 and Sora 30 use a 10,000 mAh battery and are designed for pools up to 300 m².

Beatbot Sora 70 offers:

• Up to 7 hours for water surface cleaning
• Up to 5 hours for floor cleaning in ECO mode
• Up to 4.5 hours for floor cleaning
• Up to 4 hours for floor, wall, and waterline cleaning

Beatbot Sora 30 offers:

• Up to 5 hours for floor cleaning in ECO mode
• Up to 4.5 hours for floor cleaning
• Up to 4 hours for floor, wall, and waterline cleaning

For most pool owners, the runtime difference only matters if water surface cleaning is important. If you want a robot that can spend several hours removing floating debris, Sora 70 has the clear advantage. If your cleaning mainly happens below the surface, Sora 30 offers very similar runtime for the main cleaning zones.

Navigation and Platform Cleaning

Both models are designed to navigate intelligently around pool surfaces, edges, walls, slopes, and accessible shallow areas.

Beatbot Sora 70 uses an 18-sensor real-time navigation system, including ultrasonic sensors that help detect pool walls, steps, and obstacles. This supports better route planning across the floor, walls, waterline, surface, and platforms.

Beatbot Sora 30 also uses real-time navigation with ultrasonic sensing to support wall climbing, obstacle detection, and platform cleaning. It is designed to clean accessible steps and platforms as shallow as 20 cm.

This is an important point for buyers comparing the two models: platform cleaning is not exclusive to Sora 70. Both Sora 70 and Sora 30 can clean accessible shallow platforms. The difference is that Sora 70 also adds active water surface cleaning.

Which Model Should You Choose?

Choose Beatbot Sora 70 if you want the most complete cleaning coverage.

It is the better choice if:

• Your pool often has floating leaves, pollen, or insects
• You usually skim the water surface by hand
• Your pool is near trees, plants, or open garden areas
• You want floor, wall, waterline, platform, and water surface cleaning in one robot
• You prefer more cleaning modes and a larger debris basket

Choose Beatbot Sora 30 if your main cleaning needs are below the surface.

It is the better choice if:

• Most debris sinks to the floor
• Your main concern is the floor, walls, waterline, and shallow platforms
• You do not need active water surface cleaning
• You want strong suction and core coverage in a simpler model
• You prefer a lighter robotic pool cleaner

The decision comes down to your pool routine.

If floating debris is a regular problem, Beatbot Sora 70 is the stronger choice. If your pool mainly needs floor, wall, waterline, and platform cleaning, Beatbot Sora 30 already covers the key areas well.

Final Verdict

Beatbot Sora 70 and Sora 30 are closely related, but they are built for different cleaning priorities.

Beatbot Sora 70 is the more complete option. It adds JetPulse™ water surface cleaning, app-controlled surface navigation, a larger 6 L debris basket, and more cleaning modes. It is best for pools where floating debris is a recurring issue.

Beatbot Sora 30 is the more focused option. It cleans the floor, walls, waterline, and accessible shallow platforms, while keeping the feature set simpler. It is best for pool owners who do not need active water surface cleaning but still want strong coverage below the surface.

In simple terms:

Choose Beatbot Sora 70 if your pool needs surface cleaning. Choose Beatbot Sora 30 if your pool cleaning mainly happens below the surface.

FAQs

What is the main difference between Beatbot Sora 70 and Sora 30?

The main difference is water surface cleaning. Beatbot Sora 70 has JetPulse™ Water Surface Cleaning for floating debris, while Beatbot Sora 30 focuses on the floor, walls, waterline, and accessible shallow platforms.

Can Beatbot Sora 30 clean platforms and steps?

Yes. Beatbot Sora 30 can clean accessible platforms and steps as shallow as 20 cm. Platform cleaning is not exclusive to Sora 70.

Does Beatbot Sora 70 have stronger suction than Sora 30?

No. Both models offer approximately 25,700 L/h, or 25.7 m³/h, suction power. The bigger difference is that Sora 70 adds active water surface cleaning.

Which model is better for leaves?

Beatbot Sora 70 is better if leaves often float on the water surface. Beatbot Sora 30 can still collect leaves that sink or gather on the floor, waterline, or platforms, but it does not actively clean the water surface.

Which model is better for pools near trees?

Beatbot Sora 70 is usually the better fit for pools near trees because it can clean floating debris before it sinks. Its larger 6 L basket is also useful for heavier debris conditions.

Is Beatbot Sora 30 enough for regular pool cleaning?

Yes. If your pool mainly needs floor, wall, waterline, and shallow platform cleaning, Beatbot Sora 30 already covers the most important zones. It is a strong choice if active surface cleaning is not a priority.

Do both models have smart surface parking?

Yes. Both Beatbot Sora 70 and Sora 30 include smart surface parking for easier pickup after cleaning.

Is water surface parking the same as water surface cleaning?

No. Water surface parking helps the robot rise to the surface for easier retrieval. Water surface cleaning means the robot actively removes floating debris from the top of the pool. Beatbot Sora 70 has active water surface cleaning; Sora 30 has smart surface parking.

Which model has the larger debris basket?

Beatbot Sora 70 has a 6 L debris basket. Beatbot Sora 30 has a 5 L debris basket.

Which Beatbot Sora model should I buy?

Choose Beatbot Sora 70 if floating debris is a regular problem in your pool. Choose Beatbot Sora 30 if your main cleaning needs are the floor, walls, waterline, and accessible shallow platforms.