100€ Code for Sora 70
Copy code: SORA70-1000FF

Unlike most cleaners that ignore the water surface, Sora 70 features an industry-first JetPulse® system that uses dual converging jets to actively pull debris inward. This means it captures on the first past — no nets, no follow-up, no wasted time.
Sora 70 doesn't stop at the water surface. It expertly cleans your entire pool from platforms and shallow areas, to floors and walls. No add-ons. No second steps². Just total pool management from one robotic pool cleaner.
Removes leaves and debris (no skimmer required).
Cleans large steps and platforms³ in shallow water
Removes oil and grime marks.
Scrubs pool walls and prevents algae buildup.
Removes dirt, sand, and other debris.
Sora 70 uses SonicSense® Obstacle Avoidance, powered by dual ultrasonic sensors first introduced in the Beatbot AquaSense series. This helps Sora 70 avoid collisions, prevents it from getting stuck, and offers uninterrupted cleaning.
Sora 70 uses SonicSense® Obstacle Avoidance, powered by dual ultrasonic sensors first introduced in the Beatbot AquaSense series. This helps Sora 70 avoid collisions, prevents it from getting stuck, and offers uninterrupted cleaning.
When cleaning is complete or the battery runs low, Sora 70 automatically rises to the water surface and navigates to the pool edge — powered by an industry-first, submarine-inspired floating technology. So when it's time to retrieve it, all that's left to do is walk over and pick it up — eliminating the need for heavy lifting from deep water.
When cleaning is complete or the battery runs low, Sora 70 automatically rises to the water surface and navigates to the pool edge — powered by an industry-first, submarine-inspired floating technology. So when it's time to retrieve it, all that's left to do is walk over and pick it up — eliminating the need for heavy lifting from deep water.
Sora 70 made its debut at CES 2026 after years of rigorous design, testing, and real-world user validation — capturing the attention of global media, industry experts, and leading reviewers.
The Sora 70 is compatible with swimming pools of all shapes and materials, including both in-ground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tile, stainless steel and more.
The Sora 70 is capable of cleaning saltwater pools, provided that the salt concentration is below 5000 PPM.
The Sora 70 is capable of cleaning infinity pools. First, the device will perform a three-line exploration of the pool along a zigzag path. After the exploration is completed, it will clean along the longest side of the pool. Once the first cleaning pass is finished, the device will rotate 90 degrees and then perform a supplementary cleaning along the longest side again to ensure optimal cleaning results.
The weight of the machine is 23.1 lbs (10.5 kg), and its dimensions are 17.1" x 16.9" x 11.2" (434 mm × 430 mm × 285 mm).
1. The Sora 70 can effectively capture debris of all sizes, including leaves, hair, sand, insects,acorn and more. It is capable of filtering particles as small as 150 micrometers (μm).
2. The size of the suction inlet is 0.98" × 6.69" when cleaning underwater, and 25 × (0.98" × 6.69") when cleaning the water surface.
0.7ft-11.5ft (0.2m-3.5m)
Yes. You can clean the stairs/steps using either Standard Mode or Pro Mode.
Tips:
1. The water depth of the stairs/steps must be greater than 0.7 ft (0.2 m), and both the length and width of the stairs/steps should be no less than 3.3 ft (1 m).
2. For optimal cleaning results, we recommend removing any debris from the stairs/steps before starting the cleaning process.
10000mAh, fully charges in 4.5h with 65W fast charging (110-240V).
The Sora 70 supports 2.4G/5G/Bluetooth.(Wi-Fi range: 130 ft; Bluetooth range: 65 ft)
Users can control the Sora 70 remotely and switch its modes via the App, but this operation is only available when the robot is on the water surface.
The Sora 70 can automatically detect and avoid obstacles, and its obstacle avoidance function is identical to that of the AquaSense Pro.
When the Sora70 is operating on the water surface, you can control the device via the APP by selecting either the Remote Control Mode or the One-Click Docking Function. However, the robot’s cleaning process will be interrupted during this operation.
Compared with the AquaSense 2, its new features include:
1. Advanced JetPulse™ Water Surface Cleaning;
2. Complete Coverage Including Platform Cleaning;
3. Superior Cleaning with 6800GPH Suction Power;
4. Smart Surface Parking for Easy Pick-Up;
5. Up to 5 Hours of Floor Cleaning with 10,000mAh Battery;
6. Ultra-Large 6L Debris Capacity with Fine Filtration